Velcon AC-21005 Aquacon® Water Absorbing Cartridges (5 Micron)

• Removes free and emulsified water to less than 2 ppm
• Differential pressure increase alerts operator to change cartridges
• Effectively filters silt and other particulates
• No media migration or “linting”
• Fits standard filter housings
• Micton Ratings: 5
• Inside Diameter: 1“
• Outside Diameter: 2.625"
• Length: 9.75"
• Collapse Pressure: 75 Psi
• Max. Flow Rate: 15 GPM
• Max. Operating Temperature: 250°F

Velcon AC-21005 is a 1" Aquacon® Water Absorbing Cartridge. Velcon AC-21005 has a patented construction for removing dirt and water from hydrocarbon and other oils as well as gases. The outer media layer filters out silt, rust and other particulate contaminants. The inner layers absorb water and chemically bond it so that no water will release downstream. When the cartridge reaches its water holding limit, the media swells shut and the differential pressure rapidly increases. This signals the operator that the cartridge must be changed.

• Remove water and dirt from oils, fuels, gasoline, hydraulic oil, kerosene, turbine lube oil, diesel fuel, quench oil, insulating oil, synthetic oil, biodiesel and phosphate ester oil
• Fits Velcon VF-31 Housings

***Absorbent-type monitor cartridges will NOT remove water from fuel containing alcohol blending agents (commonly called gasohol). For removal of solids, please use Velcon particle removal filters specifically made for gasohol.***

• (24) Velcon AC-21005 Aquacon® Water Absorbing Cartridges (5 Micron)

• Easy to install and remove 
• Does not affect oil additives
• Fit into many existing housings that take "string-wound" cartridges