Veeder-Root 329356-002 Four-Input Probe Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 329358-001 8 Input Interstitial/Liquid Sensor Interface Module is used with series 7943 Interstitial sensors for Fiberglass Tanks and Liquid Sensor for Steel Tanks.

Learn More

Veeder-Root 329359-001 4-Relay Output Module is used on the TLS-350 series consoles. Provides dry contact switch for 120 VAC source, used for Positive Shutdown or External Alarms.

Learn More

Veeder-Root 329362-001 RS-232 Interface Module is used for the TLS-350 series consoles.

Learn More

Veeder-Root 330149-002 SiteFax 300/1200/2400-Baud Fax/Modem Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330374-001 3-Output Pressurized Line Leak Controller Module provides dispenser handle inputs and high power output to STP control relays. Maximum of Two per console for use with WPLLD.

Learn More

Veeder-Root 331190-001 AC Input Module is used for TLS-350, TLS-350PLUS, TLS-350R and TLS-350J Consoles.

Learn More

Wayne WU000948 Ovation Display Module is made to fit Wayne Ovation and Ovation IX.

Learn More

Wayne 880590-001 DCPT LCD Display Module Assembly is used for Wayne dispenser.

Learn More

Veeder-Root 332813-001 Universal Input/Output Interface Module (UIOM) is used for Relay Control and Input Signal Monitoring.

Learn More

Veeder-Root 333564-00110-Amp Relay Module is used for TLS-450PLUS. It is designed to provide a flexible power control solution that helps manage your fuel site.

Learn More

Veeder-Root 332818-001 SiteFax™ Interface Communication Module is used for TLS-450PLUS Consoles.

Learn More

Veeder-Root 332866-001 Single RS-232 Interface Communication Module is used for TLS-450PLUS Consoles.

Learn More

Veeder-Root 332868-001 RS-232 Dual Interface Module is used for TLS-450PLUS consoles.

Learn More

Veeder-Root 330586-017 Dual-Port RS-232/RS-485 & DB9 with Maintenance Tracker ID resistor Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 333760-102 Memory Expansion Module is designed for ECPU1 board, 1 MEG.

Learn More

Veeder-Root 329362-005 is a DB25 RS-232 Single Port Interface Module with Maintenance Tracker ID resistor. It is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 333760-201 Memory Expansion Module is designed for ECPU2 board, 1 MEG (req'd for V27 or higher on >8 tanks or BIR w/ manifold tanks).

Learn More

Veeder-Root 329357-001 Five-Input Vapor Sensor Module is used with Series 7943 Vapor Sensors.

Learn More

Veeder-Root 329399-001 Five-Input Groundwater Sensor Interface Module is used with Series 7943 Groundwater Sensors.

Learn More

Veeder-Root 329956-001 Eight-Input Type A Sensor Module is used with Series 7943 Discriminating Interstitial Sensors, 7943 Non-Discriminating Dispenser Pan and Containment Sump Sensors.

Learn More

Veeder-Root 329950-001 Six-Input Type B Sensor Interface Module is used with Series 7943 Discriminating Dispenser Pan and Containment Sump Sensors.

Learn More

Veeder-Root 329999-001 Four-Input Pump Sense Interface Module is used with Continuous STP run Monitor and CSLD. 1 per 4 STP's req'd for Continuous STP Run Monitor feature with software ver. 27 or higher.

Learn More

Veeder-Root 329360-001 Module features Two-Input/Two-Relay Output Interface - 2 inputs provide 12VDC - 35VDC rated input, outputs rated 120V for Generator applications and Pump Sensing.

Learn More

Veeder-Root 847490-504 Pump Relay Monitor Module is designed to detect faulty STP control relay. Rated for 240V which used on TLS-350 Series Consoles (1 per 4 STP's req'd for Continuous STP Run Monitor feature with software ver. 27 or higher).

Learn More

Veeder-Root 329340-001 Six Slot Cover Group Module is used for TLS-350 and TLS-300 Consoles.

Learn More

Veeder-Root 329356-004 8 Input Smart Sensor Module is the lower compartment for smart Mag/Vacuum.

Learn More

This Gilbarco Dispenser Interface Module is used with the TLS-350R series, the Gilbarco TS-1000, TCR-G, T-11, T-12, AutoGas Storemaster, and any POS system using Gilbarco pump access module.

Learn More

Veeder-Root 330160-100 Business Inventory Reconciliation (BIR) & Variance Analysis (VA) (SEM) Software Enhancement Module is used for Adding BIR to a Tls-350/Tls-350 Plus.

Learn More

Veeder-Root 330160-060 Wireless / Pressurized Line Leak Detection (W/PLLD) Software Enhancement Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 333545-001 application software is used for TLS-450PLUS tank gauge. Application software and one hardware console configuration must be purchased together.

Learn More

Veeder-Root 332812-001 Universal Sensor Module Interface Module is used for Probes, Sensors, and DPLLD (TLS-450PLUS).

Learn More

Veeder-Root 330160-003 Fuel Manager Software Enhancement Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330160-010 Pressurized Line Leak Detection (PLLD) Software Enhancement Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330160-050 Wireless / Pressurized Line Leak Detection (W/PLLD) Software Enhancement Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 329339-001 Single Cover Group Module is used for TLS-350 and TLS-300 Consoles.

Learn More

Veeder-Root 329348-001 Local Printer Module is used for TLS-350 Consoles.

Learn More

Veeder-Root 329356-003 4 Probe / 4 Sensor Interface Module is used for TLS-350J Consoles.

Learn More

Veeder-Root 329356-005 4 Probe/4 Liquid Sensor Interface Module is an accessory of In-station Diagnostics.

Learn More

Veeder-Root 329362-003 RS-232 Satellite Interface Module is used for TLS-350 series consoles.

Learn More

Veeder-Root 329362-004 RS-232 Serial Satellite Interface Module is used for TLS-350 series consoles.

Learn More

Veeder-Root 330020-424 TCP/IP Communications Interface Module is used for TLS-300i and TLS-300c consoles.

Learn More

Veeder-Root 330020-425 Ethernet TCP/IP Communications Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330020-501 is a Wayne IDPOS Dispenser Interface Module (no DIM Install. Kit Required).

Learn More

Veeder-Root 333760-203 Memory Expansion Module is used for ECPU2 Board, 2 MEG (req'd for ISD or Maintenance Tracker).

Learn More

Veeder-Root 330160-004 In-Station Diagnostics (ISD) Software Enhancement Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330280-401 Gilbarco G-Site Dispenser Interface Module is designed for TLS-350R Consoles.

Learn More

Veeder-Root 330280-201 Gilbarco Dispenser Interface Module is used for TLS-350R series Consoles. It requires DIM Installation Kit.

Learn More

Veeder-Root 330404-002 SAM Dispenser Interface Module is used for TLS-350R series Consoles, requires DIM Installation Kit.

Learn More

Veeder-Root 331001-003 Gasboy CFN2 Dispenser Interface Module is used for TLS-350R series Consoles, requires DIM Installation Kit.

Learn More

Veeder-Root 331001-002 Gasboy CFN1 Dispenser Interface Module is used for TLS-350R series Consoles, requires DIM Installation Kit.

Learn More

Veeder-Root 330280-001 BIR Protocol Dispenser Interface Module is used for TLS-350R series Consoles, no DIM Installation Kit required.

Learn More

Veeder-Root 330250-001 Mechanical Dispenser Interface Module is used for TLS-350R series Consoles, requires VR Pulse Totalizer.

Learn More

Veeder-Root 331214-001 LV Dispenser Interface Module is used for TLS-350R series Consoles, no DIM Install. Kit required.

Learn More

Veeder-Root 331354-001 Tokheim 67 Dispenser Interface Module is used for TLS-350R series Consoles, requires DIM Install. Kit.

Learn More

Veeder-Root 330039-001 Eight-Input Interface Probe Module is designed for TLS-300 series consoles.

Learn More

Veeder-Root 330230-001 4 Probe/8 Sensor Module is designed for TLS-300i series consoles.

Learn More

Veeder-Root 330513-001 2 Probe 8 Sensor Options Module is designed for TLS-300C series consoles.

Learn More

Veeder-Root 576006-786 Relay I/O 10 - Position Module is designed for TLS-300 series consoles.

Learn More

Veeder-Root 576006-860 Plug 18 - Position Type B Module is used for TLS-350 and TLS-300 Consoles.

Learn More

Veeder-Root 330020-617 RS-232 Dual Interface Module (Comm. Slots 1, 2, 3) is used for TLS-450PLUS consoles.

Learn More

Veeder-Root 330020-618 RS-232/RS-485 Dual Interface Module (Comm. Slots 1, 2, 3) is used for TLS-450PLUS consoles.

Learn More

Veeder-Root 330020-619 Universal Probe/Sensor Interface Module is used for TLS-450PLUS consoles.

Learn More

Veeder-Root 330020-620 Universal Input/Output Interface Module is used for TLS450 consoles.

Learn More

Veeder-Root 330020-814 10-Amp Controller Module is used for TLS-450PLUS consoles.

Learn More

Veeder-Root 330020-665 3 - Inputs CDIM Interface Module is designed for TLS-450PLUS consoles.

Learn More

Veeder-Root 330020-680 12 - Inputs Low Voltage Dispenser Interface Module is designed for TLS-450PLUS consoles.

Learn More

Veeder-Root 330020-681 12 - Inputs Mechanical Dispenser Interface Module is designed for TLS-450PLUS consoles.

Learn More

Veeder-Root 330148-001 RS-232 Interface with Auxiliary Port Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330161-001 Static In-Tank Testing Software Enhancement Module is used for TLS-300i and TLS-300c Consoles. Mag Probes with leak detection are required for Static In-Tank Testing or Continuous Statistical Leak Detection.

Learn More

Veeder-Root 330161-003 Continuous Statistical Leak Detection (CSLD) Software Enhancement Module (SME) is used for TLS-300i and TLS-300C Consoles. Mag Probes with leak detection are required for Static In-Tank Testing or Continuous Statistical Leak Detection.

Learn More

Veeder-Root 330280-801 Southland ISP EDIM Module is used for Carbon Canister Vapor Polisher.

Learn More

Veeder-Root 330586-001 Dual-Port RS-232/RS-485 Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330586-011 Dual-Port Remote Display/RS-232 Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330586-015 Dual-Port Remote Display/Satellite RS-485 Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330586-016 Dual-Port RS-485/Serial Satellite Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 330841-001 3-Output Pressurized Line Leak Controller Module provides dispenser handle inputs and high power output to STP control relays (120V).

Learn More

Veeder-Root 330843-001 Six-Input Pressurized Line Leak Interface Module is for use with PLLD.

Learn More

Veeder-Root 330843-002 4 Pressurized Line Leak (PLLD) Input Module is a service board for TLS-350J Consoles.

Learn More

Veeder-Root 330874-001 Wireless Pressurized Line Leak AC Interface Module is for use with WPLLD, designed to monitor 240V signal from STP. Max 1 per console.

Learn More

Veeder-Root 330883-001 Wireless Pressurized Line Leak Communications Interface Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 331408-001 10 Amp Relay Dispenser Controller Module is designed to control dispenser power for shutdown purposes. It is for use on TLS-350 Series of automatic tank gauge consoles.

Learn More

Veeder-Root 332250-001 Seven-Input Smart Sensor Module w/ Embedded Pressure Sensor Interface is used for Vac Sensor Monitoring and ISD (Min 1 req'd for Vac Sensor Monitoring).

Learn More

Veeder-Root 332870-001 RS-232/RS-485 Dual Interface Module is used for TLS-450PLUS consoles.

Learn More

Veeder-Root 330160-002 Continuous Statistical Leak Detection Software Enhancement Module is used for TLS-350 Series Consoles.

Learn More

Veeder-Root 333149-001 BIR / AccuChart EDIM Module is factory installed in new TLS-450PLUS consoles.

Learn More

Veeder-Root 333580-001 BIR / AccuChart CDIM 3 - Inputs Module is factory installed in new TLS-450PLUS consoles.

Learn More

Veeder-Root 333581-001 BIR / AccuChart LVDIM 12 - Inputs Module is factory installed in new TLS-450PLUS consoles.

Learn More

Veeder-Root 333582-001 BIR / AccuChart MDIM 12 - Inputs Module is factory installed in new TLS-450PLUS consoles.

Learn More