GPI 110905-1 Shear Key Kit is the repair kit for any GPI transfer gear pump. (Keys Only)

Learn More

GPI 13353302 Vacuum Breaker Kit is the repair kit for GPI transfer pump model M-3120 Series.

Learn More

GPI 13353303 Vacuum Breaker Kit is the repair kit for GPI transfer pump model M-3130 Series.

Learn More

Simer 203 5/8"x5/8" Lovejoy Coupling is for use to direct-mount the engine to pump.

Learn More

Simer's 53X is a replacement impeller kit which fits the BP20X models from Superior Pump. Easy to change and comes complete with a new gasket.

Learn More

Simer's 63X is a replacement impeller kit which fits the BP21X models from Superior Pump. Easy to change and comes complete with a new gasket.

Learn More

This BP21X bronze paddle pump is compatible with water, oil, diesel fuel, fertilizer and some chemicals.

Learn More

Fill-Rite 5200F1790 Hand Pump Spout is designed to be used with Fill-Rite 5200 series hand pumps (model FR150, FR151, FR152, FR156).

Learn More

Simer 54 is a grease cap for Simer BP21X paddle pump.

Learn More

Fill-Rite 100KTF1214 is a Rebuild Kit for Series 100 Pump. For use with FR112 and FR112C Rotary Hand Pumps.

Learn More

The ICS MR1 Pulser contains a digital pulse filter, which eliminates overcounting due to vibration. Designed to fit all FillRite meter-registers, as well as the Dresser Wayne 700R meter-register.

Learn More

Fill-Rite KIT320RK Rebuild Kit is for FR3200 Series Pumps.

Learn More

Fill-Rite KIT320RG Rotor Group Kit is for FR3200 Series Pumps.

Learn More

Fill-Rite KIT320MA Meter Flange Kit is for FR3200 Series Pumps.

Learn More

Fill-Rite KIT320BG Inlet Flange Kit is used for FR3200 Series Pumps.

Learn More

Fill-Rite KIT320BV Bypass Valve Kit is used for FR3200 Series Pumps.

Learn More

Fill-Rite KIT320SK External Seals Kit is used for FR3200 Series Pumps.

Learn More

Fill-Rite KIT320SW Line Switch / Breaker Kit is used for FR3200 Series Pumps.

Learn More

Fill-Rite KIT320SL Shaft Seal Kit is used for FR3200 Series Pumps.

Learn More

Fill-Rite KIT320MK Replacement Motor Kit is for FR3200 Series Pumps.

Learn More

Fill-Rite 30KTF4919 Rebuild Kit is for FR30 Series Pumps.

Learn More

Fill-Rite KIT100WGP Bulk Wood Handle Kit is for FR30 and FR100 Series Pumps.

Learn More

Fill-Rite KIT100WHP Bulk Shaft Seal Kit is for FR100 Series Pumps.

Learn More

Fill-Rite KIT152VBP Bulk Vacuum Breaker Kit is for FR100 and FR5200 Series Pumps.

Learn More

Fill-Rite 5200KTF1828 Rebuild Kit is for FR5200 Series Pumps.

Learn More

GPI 121010-11 is a shaft key for M-3130 115V / 230V Super Duty Transfer Pump.

Learn More

GPI 110010-1 is a Bypass Poppet for M-120 TNF Pump.

Learn More

GPI 110016-1 is an inlet fitting for M-150S, M-180S & M-240S 12V & 24V Electric Gear Pumps.

Learn More

GPI 110264-1 is a top suction pipe for M-150S-EM Electric Fuel Pump.

Learn More

GPI 110276-02 is a switch coverplate assembly for M-1115S 115V Electric Gear Pump.

Learn More

GPI 110277-07 is a switch assembly for M-180S Pump.

Learn More

GPI 110524-1 is an armature assembly kit for M-150S-EM Pump.

Learn More

GPI 110526-1 is a motor housing kit for M-150S-EM and M-240S Pump.

Learn More

GPI 110531-01 is a switch kit for M-120, M-150, M-1100, M-150S, M-180S, and M-240S pump models.

Learn More

GPI 110906-03 is a B100 Shaft Seal Conversion Kit. The kit includes shaft seal required to convert GPI Gear Pumps for use with B100.

Learn More

GPI 110910-02 is a 12 volt switch kit for M-120 TNF Pump.

Learn More

GPI 110929-01 is a 22 feet long with 12/2 AWG power cord for EZ-8, M-150, M-180, and M-240 DC models only.

Learn More

GPI 114034-1 is a packing seal for HP-100 Dual-Flo Piston Hand Pump.

Learn More

GPI 115500-4 is a 4" chemical bung adapter assembly for P-120H & P-200H 12V Plastic Utility Pump.

Learn More

GPI 115519-1 is a wet seal kit for VP12H/H High Viscosity Pump. The kit includes the required number of the following items: End Over Seal, Lower Cover Seal, Bypass Seal & the O-Ring Seal.

Learn More

GPI 115520-1 is a valve kit for PA-120H & PA-200H 115V Plastic Utility Pump. Includes valve and ring.

Learn More

GPI 115521-1 is a bung adapter seal kit for VP12H/H High Viscosity Pump. The kit includes the Disc Assembly (115508-2), Bung O-Ring (901002-11), and O-Ring Seal (901002-12).

Learn More

GPI 115546-1 is a bypass valve assembly kit for VP12H/H High Viscosity Pump.

Learn More

GPI 118504-1 overhaul kit is used for PA-200H 115V/P-200H 12V Plastic Utility Pump, includes Coverplate O-Ring #16, Motor Shaft Seal #6C, Motor Adapter Seal #6A, Inlet O-Ring, Camplug O-Ring, Seal, Key, 2 Wear Plates & 2 Gears.

Learn More

GPI 118506-1 is a herbicide seal kit for P-120H & P-200H 12V Plastic Utility Pump. Includes a Coverplate O-Ring, Motor Shaft Seal, Motor Adapter Seal, Inlet O-Ring, Camplug O-Ring, Poppet O-Ring and a Plunger O-Ring.

Learn More

GPI 121013-1 is a super duty check valve strainer assembly for M-3120 115V Pump.

Learn More

GPI 121019-1 is a super duty check valve spring for M-3120 115V Pump.

Learn More

GPI 121231-1 2 in. x 1 in. FNPT tank adapter is used for L5016, L5116 & L5132 Heavy-Duty Oil Transfer Pumps.

Learn More

GPI 121231-5 is a 2 in. x 1-1/4 in. FNPT tank adapter.

Learn More

GPI 133022-1 is a heavy duty rotor for M-3025 & M-3425 Pump, 8 vane.

Learn More

GPI 133263-01 Heavy Duty Battery Clamps is used for P-200-2UR, P-200H-2UR, P-200H-TAP & P-120H-2UR Lightweight Oil and Chemical Transfer Pumps.

Learn More

GPI 133503-02 is a B100 shaft seal kit. Includes a shaft seal, retaining ring, and spacer washer to convert GPI Vane Pumps for use with B100. Requires minimum operating temp. of 40° for B100.

Learn More

GPI 133514-01 is a vapor recover kit for M-3120 & M-3130 Pump.

Learn More

GPI 904001-22 is a lock washer for VP12H/H High Viscosity Pump.

Learn More

GPI 904003-5 is a camshaft thrust washer for VP12H/H High Viscosity Pump.

Learn More

GPI 904003-7 is a 1/4-20 x 1/2 in. screw for VP12H/H High Viscosity Pump.It is included in the Bearing Mount Assembly.

Learn More

GPI 904003-10 is a camshaft snap ring for VP12H/H High Viscosity Pump.

Learn More

GPI 904003-11 is a 1/4" washer for VP12H/H High Viscosity Pump. It is included in the VP12H/H Piston Assembly Kit.

Learn More

GPI 906004-50 is a heavy duty spring pin for M-3025 & M-3425 Heavy Duty Pump.

Learn More

GPI 906004-62 is a replacement cap for Vent Cap Assembly.

Learn More

GPI 114504-503 is a 3/4 in. x 8 ft hose and nozzle assembly kit for HP-100 Hand Pump, includes hose, clamp & nozzle.

Learn More

GPI 110120-1 is a hook for automatic nozzle for M-150S, M-180S, M-240S Electric Gear Pumps.

Learn More

GPI 110120-2 is a M-3120 automatic nozzle hook for Leaded Spout.

Learn More

GPI 115523-1 is a piston assembly kit for VP12H/H High Viscosity Pump.

Learn More

The GPI 129300-01 is a 10 micron particulate removing spin-on fuel filter. It delivers up to 18 GPM (67 LPM), with 1 - 12 UNF mounting thread.

Learn More

GPI 129300-02 is a 10 micron water & particulate filter, It delivers up to 18 GPM (67 LPM), with 1 - 12 UNF. mounting thread.

Learn More

The GPI 129320-01 is a 10 micron particulate removing spin-on fuel filter. It delivers up to 30 GPM (113 LPM), with 1 1/2 - 16 UNF mounting thread.

Learn More

GPI 129320-02 is a 10 micron water & particulate removing spin-on filter, It delivers up to 30 GPM (113 LPM), with 1 1/2 - 16 UNF mounting thread.

Learn More

GPI 129340-02 is a 10 micron particulate filter with draincock. It delivers up to 18 GPM (67 LPM), with 1 - 12 UNF mounting thread.

Learn More

OPW 50030 is a stainless steel adaptor shaft , SAE-6, Male 9/16" -18 Male to 9/16" -18 Male. Can be threaded into LB/LD/LE receptacles.

Learn More

OPW 50061 is a stainless steel adaptor shaft , SAE-10, 9/16" -18 Male to 7/8" -14 Male. It can be threaded into LB/LD/LE receptacles.

Learn More

Cim-Tek 60002 Pre-Vent Cap w/ Locking Arm is designed for 2'' NPT tank opening, widely used on small ground farm, commercial gasoline and distillate tanks, fuel transfer & small oil storage tanks and Industrial oil transfer tanks.

Learn More

Sotera 400F6679 is a 90 Degree Flange with brass inserts for a 400 Series Sotera Pump.

Learn More

Red Jacket 410154-001 is a complete set of O-rings for 4 inch Red Jacket submersible turbine pump and variable speed replacement part.

Learn More

Red Jacket 852-200-5 1.5 HP Petroleum UMP Motor is used on the Red Jacket ump submersible pump. Model Number: UMP150U1.

Learn More

FE Petro 400276903 PMA-150 is a 1 1/2 HP Pump Motor Assembly used on 4" Submersible Pumps.

Learn More

FE Petro 400276902 PMA-75 is a 3/4 HP Pump Motor Assembly used on 4" Submersible Pumps.

Learn More

Certificate of Calibration Traceable to National Institute of Standards Technology; Provided by GPI for A1 and G2 turbine meters only.

Learn More

GPI 144100-01 5-Vane Kit is used for fuel transfer pump. Item# 14 marked in illustrated parts drawing.

Learn More

Red Jacket 410164-002 is a 1.5 Hp (1 Ph) Fixed Speed Capacitor used on submersible turbine pump. Model Number: 25 uF

Learn More

GPI 904011-88 Set Screw Only is used on fuel transfer pumps. Item# 33b marked in illustrated parts drawing.

Learn More

Fill-Rite KIT321RK is an Overhaul Kit for NX3200 Series Pumps. Kit includes rotor, rotor cover, vanes, O-ring seal, shaft seal kit, bypass valve, inlet screen/seal, rotor key, hardware.

Learn More

Fill-Rite KIT321RG is an Rotary Group for NX3200 Series Pumps. It includes rotor, vanes, rotor key, gasket, rotor cover, screws.

Learn More

Fill-Rite KIT321BV is a Bypass Kit for NX3200 Series Pumps. It includes poppet, spring, o-ring, cap.

Learn More

Fill-Rite KIT321SK is an External Seal Kit for NX3200 Series Pumps. It includes rotor cover o-ring seal, inlet gasket, screen.

Learn More

Fill-Rite KIT321PC is 20' power cord with threaded sleeve attachment and o-ring seals.

Learn More

GPI 904005-39 1/4''-20 x 7/8" Hex Head Screw is used on fuel transfer pumps. Item# 33 marked in illustrated parts drawing.

Learn More

GPI 904005-9 3/4" NPT Nipple

Learn More

GPI 129500-01 1-3/8" Filter Quick-Fit Accessories Kit is designed for G20 fuel transfer pumps.

Learn More

The ICS MR1 Pulser contains a digital pulse filter, which eliminates overcounting due to vibration. Designed to fit all FillRite meter-registers, as well as the Dresser Wayne 700R meter-register.

Learn More

GPI 133537-01 is a fuel filter kit (40 GPM). Comes with a 1 in. NPT cast iron adapter, 30 micron filter and 1 in. x 4 in. nipple.

Learn More

GPI 129340-06 is a 30 micron particulate filter. It delivers up to 40 GPM (151 LPM), with 1 1/2 - 16 UNF mounting thread.

Learn More

GPI 162205-01 1" Outlet Adaptor 90 deg. for M30 Meter.

Learn More

Fill-Rite KIT321BG NPT Inlet Flange Kit is used for NX3200 Series Pumps. All threads are NPT.

Learn More

Fill-Rite KIT321NB Nozzle Boot Kit is used for NX3200 Series Pumps.

Learn More

Fill-Rite KIT321AC Power Cable Kit is used for NX3200 Series Pumps.

Learn More

Fill-Rite KIT321SW Switch Assembly Kit is used for NX3200 Series Pumps.

Learn More

Fill-Rite 702KTF3518 Universal Nozzle Boot & Switch Rod Kit comes with a Switch Rod for 702 Series Pumps & Switch Rod for 305 Series Dispensers, a Nozzle Retainer, a Handle Stop, Hole Plugs, a Handle Switch, Fasteners & Switch Rod Hardware.

Learn More

Fill-Rite KIT702FP Old FR702 Faceplate includes Mounting Hardware and Faceplate.

Learn More

Fill-Rite KIT702VELRUFP FR702VELRU Faceplate includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT702VLRUFP FR702VLRU Faceplate includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT702VRFP FR702VR Faceplate includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT702VRGUFP FR702VRGU Faceplate includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT702VRUFP FR702VRU Faceplate includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT902LRFP FR902CLR Faceplate is used on the FR902CLR mechanical meter cabinet, includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT902LRUFP FR902CLRU Faceplate is used on the FR902CLRU mechanical meter cabinet, includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT902RFP FR902CR Faceplate is used on the FR902CR mechanical meter cabinet, includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT902RUFP FR902CRU Faceplate is used on the FR902CRU mechanical meter cabinet, includes 2 Screws, a Faceplate and a Clear Cover.

Learn More

Fill-Rite KIT702MG Gallon Meter is used with FR702 or FR702V Cabinet Pumps.

Learn More

Fill-Rite KIT702ML Liter Meter is used with FR702 or FR702V Cabinet Pumps.

Learn More

Fill-Rite KIT902CC Clear Cover is used on the FR902C mechanical meter cabinets and the FR702V pump cabinets.

Learn More

Fill-Rite KIT902LS Line Switch is used on the FR902C mechanical meter cabinets.

Learn More

Fill-Rite KIT902HA Switch Handle Assembly is used on the FR902C mechanical meter cabinets.

Learn More

Fill-Rite KIT902SV Replacement Solenoid Valve is used on the FR902C UL listed mechanical meter cabinets.

Learn More

Fill-Rite KIT902MB Wall Mount Bracket is used on the FR902C mechanical meter cabinets.

Learn More

Fill-Rite KIT900CABINT Digital Meter Kit is used in the FR902DP and FR302DP Cabinets.

Learn More

Fill-Rite KIT302DPD Digital Register Kit is used in the FR902DP and FR302DP Cabinets. The register has the cable coming out the back to connect to the meter in the cabinets.

Learn More

Fill-Rite KIT305NZ Universal Nozzle Boot Kit can be used on the older FR305 cabinet meters, the FR702 cabinet pumps, the FR902DPU and FR302DPU.

Learn More

Fill-Rite KITPD Pedestal can be used with the FR902DPU and FR302DPU Only.

Learn More

Fill-Rite KITWM Wall Mount Bracket can be used with the FR902DPU and FR302DPU Only.

Learn More

Fill-Rite KIT812PC Power Cable Kit is used with the RD8 and RD12 series pumps.

Learn More

Fill-Rite KIT812RG 8 GPM Rebuild Kit is used with the RD8 series pumps.

Learn More

Fill-Rite KIT812FL Single NPT Flange Kit is used with the RD8 and FR12 series pumps, NPT thread in flange.

Learn More

Fill-Rite KIT812FL Single BSPP Flange Kit is used with the RD8 and FR12 series pumps, BSPP thread in flange.

Learn More

Fill-Rite KIT812SL Seal Kit is used with the RD8 and RD12 series pumps.

Learn More

Fill-Rite KIT812NH 8 GPM Hose Kit is used with the RD8 series pumps.

Learn More

Fill-Rite KIT812NP Bung Mount Kit is used with the RD8 and RD12 series pumps.

Learn More

Fill-Rite KIT1212NH 12 GPM Hose Kit is used with the RD12 series pumps.

Learn More

Fill-Rite KIT1212RG 12 GPM Rebuild Kit is used with the RD12 series pumps.

Learn More

GPI 110241-02 fuel extension suction pipe is used for HP-100, DP-20 & RP-10 Fluid Transfer Hand Pumps.

Learn More

GPI 110242-01 18' w/ 12/2 AWG Power Cord Kit is used for M-150, M-240, M-180, G20 & PR020-012 Series Pumps.

Learn More

GPI 147500-01 is an overhaul kit for G8P Pump. Includes motor shaft seal, pump gears, replacement o-rings.

Learn More

GPI 139130-02 is a 90° Pump & Meter Combo Adapter.

Learn More