This thermal paper is a perfect choice for a receipt paper roll.

Learn More

Omntec MTG-4 4' shaft length probe used with the OEL8000II monitors product levels, water levels and temperature in both underground and aboveground tank applications.

Learn More

Omntec MTG-6 6' shaft length probe used with the OEL8000II monitors product levels, water levels and temperature in both underground and aboveground tank applications.

Learn More

Omntec MTG-8 8' shaft length probe used with the OEL8000II monitors product levels, water levels and temperature in both underground and aboveground tank applications.

Learn More

Omntec MTG-9 9' shaft length probe used with the OEL8000II monitors product levels, water levels and temperature in both underground and aboveground tank applications.

Learn More

Omntec MTG-10 10' shaft length probe used with the OEL8000II monitors product levels, water levels and temperature in both underground and aboveground tank applications.

Learn More

Omntec MTG-11 11' shaft length probe used with the OEL8000II monitors product levels, water levels and temperature in both underground and aboveground tank applications.

Learn More

Omntec OEL8000III-K4 is an automatic tank gauging and leak detection system, accepts up to 4 magnetostrictive probes. This PROTEUS Series can simultaneously monitor product levels, water levels, temperature, leaks, and much more.

Learn More

Omntec OEL8000III-K8 is an automatic tank gauging and leak detection system, accepts up to 8 magnetostrictive probes. This PROTEUS Series can simultaneously monitor product levels, water levels, temperature, leaks, and much more.

Learn More

Omntec OEL8000III-B4 is an economical automatic tank gauging and leak detection system, accepts up to 4 magnetostrictive probes. This PROTEUS Series can simultaneously monitor product levels, water levels, temperature, leaks, and much more.

Learn More

Omntec OEL8000III-B8 is an economical automatic tank gauging and leak detection system, accepts up to 8 magnetostrictive probes. This PROTEUS Series can simultaneously monitor product levels, water levels, temperature, leaks, and much more.

Learn More

PROTEUS Mini-Me TM is a color graphic display providing Automatic Tank Gauge (ATG) users the freedom to gain access to current tank gauging, leak detection and alarm status from ATG consoles.

Learn More

The OEL8000II is a comprehensive tank-gauging and leak-detection system. Controller with 4-line by 40-character display accepts up to 8 magnetostrictive probes and up to 44 BX-series leak-detection sensors.

Learn More

The OEL8000IIP is a comprehensive tank-gauging and leak-detection system. Controller with printer and 4-line by 40-character display accepts up to 8 magnetostrictive probes and up to 44 BX-series leak-detection sensors.

Learn More

OMNTEC L1PD2 features high-level liquid sensors and product distinguishing sensors for tank high level & leak detection. Comes standard with three normally open relays.

Learn More

OMNTEC L2PD4 features high-level liquid sensors and product distinguishing sensors for tank high level & leak detection. Comes standard with two normally open relays.

Learn More

OMNTEC L3PD6 features features high-level liquid sensors and product distinguishing sensors for tank high level & leak detection. Comes standard with three normally open relays.

Learn More

The OMNTEC LU1 single sensor controller is designed for monitoring high level and leak detection in a variety of applications. Comes standard with one normally open relay.

Learn More

The OMNTEC LU2, two channel sensor controller is designed for monitoring high level and leak detection in a variety of applications.Comes standard with two normally open relay.

Learn More

The OMNTEC LU3, three channel sensor controller is designed for monitoring high level and leak detection in a variety of applications.Comes standard with three normally open relay.

Learn More

The OMNTEC LU2-OW, two channel sensor controller is designed for monitoring high level and leak detection in a variety of applications, available for use with oil water seperator. Comes standard with two normally open relay.

Learn More

Omntec OEL8000IIIK4P is an automatic tank gauging and leak detection system with printer, accepts up to 4 magnetostrictive probes. This PROTEUS Series can simultaneously monitor product levels, water levels, temperature, leaks, and much more.

Learn More

Omntec OEL8000III-K8P is an automatic tank gauging and leak detection system with printer, accepts up to 8 magnetostrictive probes. This PROTEUS Series can simultaneously monitor product levels, water levels, temperature, leaks, and much more.

Learn More

Omntec RD-PCK is a Power Cord Kit for use with Omntec RD7CTS Mini-Me PROTEUS remote displays.

Learn More

Omntec RD-232C-75 is a 75 feet RS232 cable for use with Omntec RD7CTS Mini-Me PROTEUS remote displays.

Learn More

The OMNTEC LU2-OWIR is a two channel (combination leak sensing/high oil level) audio/visual controller capable of accepting one OWI-1 sensor and one leak sensor.

Learn More

The OMNTEC LU3-OWIR a three channel (combination leak sensing/high oil level) audio/visual controller capable of accepting one OWI-2 sensor and one leak sensor.

Learn More

The OMNTEC LU4 , four channel sensor controller is designed for monitoring high level and leak detection in a variety of applications.Comes standard with two normally open relays.

Learn More

The OMNTEC LU6 six channel sensor controller is designed for monitoring high level and leak detection in a variety of applications. Capable of accepting up to six single point optic sensors.

Learn More

The OMNTEC LU9 nine channel sensor controller is designed for monitoring high level and leak detection in a variety of applications. Capable of accepting up to nine single point optic sensors.

Learn More

Omntec BX-L12 is a 12' liquid level detection sensor, designed to provide product level alarms for high, caution or low product levels. It is a sensor for single-point liquid alarm.

Learn More

Omntec BX-L20 is a 20' liquid level detection sensor, designed to provide product level alarms for high, caution or low product levels. It is a sensor for single-point liquid alarm.

Learn More

Omntec BX-LS Nondistinguishing Leak-Detection Sensor is the ideal sensor for sumps, dispenser pans, containment areas and annular spaces of double-wall steel tanks.

Learn More

The BX-LWF-10 nondistinguishing sensor was designed to fit into the annular space of dry double-wall fiberglass tanks with 10 feet diameter. With its slim, compact shape and flexible snake-like shaft, the BX-LWF can easily be installed and removed from grade.

Learn More

The BX-LWF-4 nondistinguishing sensor was designed to fit into the annular space of dry double-wall fiberglass tanks with 4' diameter. With its slim, compact shape and flexible snake-like shaft, the BX-LWF can easily be installed and removed from grade.

Learn More

The BX-LWF-6 nondistinguishing sensor was designed to fit into the annular space of dry double-wall fiberglass tanks with 6' diameter. With its slim, compact shape and flexible snake-like shaft, the BX-LWF can easily be installed and removed from grade.

Learn More

The BX-LWF-8 nondistinguishing sensor was designed to fit into the annular space of dry double-wall fiberglass tanks with 8' diameter. With its slim, compact shape and flexible snake-like shaft, the BX-LWF can easily be installed and removed from grade.

Learn More

The BX-PDS was designed to accommodate a variety of applications. With its convenient size and ability to detect liquids at any angle, the BX-PDS sensor is the ideal sensor for sumps, dispenser pans and containment areas.

Learn More

The BX-PDWS was designed to fit into the annular space of steel double-wall tanks. It can distinguish liquid hydrocarbons from water, and, like all BX-series sensors, can be remotely tested without removal.

Learn More

The BX-PDWF-10 was designed to fit into the annular space of dry double-wall fiberglass tanks with 10 feet diameter. It can distinguish liquid hydrocarbons from water, and, like all BX-series sensors, can be remotely tested without removal.

Learn More

The BX-PDWF-4 was designed to fit into the annular space of dry double-wall fiberglass tanks with 4 feet diameter. It can distinguish liquid hydrocarbons from water, and, like all BX-series sensors, can be remotely tested without removal.

Learn More

The BX-PDWF-6 was designed to fit into the annular space of dry double-wall fiberglass tanks with 6 feet diameter. It can distinguish liquid hydrocarbons from water, and, like all BX-series sensors, can be remotely tested without removal.

Learn More

The BX-PDWF-8 was designed to fit into the annular space of dry double-wall fiberglass tanks with 8 feet diameter. It can distinguish liquid hydrocarbons from water, and, like all BX-series sensors, can be remotely tested without removal.

Learn More

The dual-point BX-RES sensor is designed for double-wall brine-filled fiberglass tanks. This BX-RES is for monitoring level changes in the reservoir of brine-filled, double-wall fiberglass tanks.

Learn More

Omntec BX-UT is a Universal translator - adapter for non-BX sensors.

Learn More

Omntec L-1-L is a 20" Liquid Level Detection Sensor with single-point liquid alarm.

Learn More

Omntec L-1-D is a Liquid Level Detection Sensor with single-point liquid alarm. L-1-D is for other sensor lengths, "D" must be specified by user.

Learn More

Omntec L-2-L is a Liquid Level Detection Sensor for multi-point liquid level alarm, over 36".

Learn More

Omntec L-2-S is a Liquid Level Detection Sensor for multi-point liquid level alarm, under 36".

Learn More

OMNTEC L-R-1 Dual Point Sensor is designed to monitor level changes in reservoir of double-wall, brine-filled fiberglass tanks.

Learn More

Omntec LS-ASC leak detection sensor is designed for monitoring containment sumps, dispenser pans, the interstice of steel tanks and other containment areas.

Learn More

Omntec OWI-1 is a single point oil/ water interface sensor for use in oil/ water separator.

Learn More

Omntec OWI-2 is a two point oil/ water interface sensor with one oil/ water interface float and one liquid level float for use in oil/ water separator.

Learn More

The AD-8-1 is an automatic programmable speech dialer with multiple alarm inputs. It is designed for verbal reporting of two separate events, one message per input.

Learn More

Omntec AM-LED is an Amber Replacement LED Light.

Learn More

Omntec BNF-4 is a 4" Buna Float.

Learn More

Omntec HRN-2 is the Horn Board for the LU series Console. Must specify which console you have.

Learn More

Omntec KP-20B3L1D is a Keypad w/ LCD. of OEL8000.

Learn More

Omntec LF-1 is a Single Point Float Sensor, 12" standard length.

Learn More

Omntec MB-8T44LS is a Tank Motherboard for OEL8000II 8 .

Learn More

Omntec MDR-2 is a 14,400-baud Fax / Modem for OEL8000II.

Learn More

Omntec PS-102 is a 36 character thermal Printer for OEL8000II.

Learn More

Omntec RD-LED is a Red Alarm Replacement LED Bulb.

Learn More

Omntec WRS-232R is a Wireless RS-232 "Extended Reach" Repeater.

Learn More

Omntec YCBL6-MTG is a 6' Yellow Communications Cable for MTG Probe.

Learn More

Omntec YCBL12-MTG is a 12' Yellow Communications Cable for MTG Probe.

Learn More

Omntec 2IN-CAP is a 2" Cap for MTG probe and sensors.

Learn More

Omntec 4IN-CAP is a 4" Cap for MTG probe and sensors.

Learn More

Omntec DC-RP-12 DataCheck™ Repeater is a microprocessor-controlled transceiver which identifies signals from DataStik™ FillCheck® DataCheck™ transmitters and re-broadcasts those signals at full power.

Learn More

Omntec DC-RX-SR-O DataCheck™ Serial Receiver receives transmissions from FillCheck® or DataCheck™ transmitters and converts this information into a serial data which can be monitored and interpreted by the user’s computer or other microprocessor device.

Learn More

Omntec DC-TX-D1 is a discrete safe transmitter.

Learn More

Omntec ENC-4X is a Fiberglass Hinged Cover Type 4X Enclosure for the OEL8000II.

Learn More

The FillCheck Alarm Manager is a full-featured alarm logic controller, provides a simple and convenient user interface for OMNTEC’s discrete intrinsically safe transmitters (DC-TX-D1).

Learn More

Omntec IB-12V is a 12VDC low-voltage output board.

Learn More

Omntec IB-C420-4 4-20MA is an interface board for up to 4 tanks.

Learn More

Omntec IB-RAS is an interface board for the RAS audio/visual remote annunciator. Accepts multiple remotes.

Learn More

Omntec IB-RB2 is an Interface Board, relay card with (4) 5 amp SPDT relays (6 card max per system.

Learn More

Omntec LSF Universal Sump Float Sensor It is designed to detect liquids in piping and dispenser sumps. Interfaces with most control panels.

Learn More

Omntec RA-1 is an One Tank High Level Remote Annunciator. The OMNTEC's RA-series remote annunciators are compatible with LU and LPD controllers.

Learn More

Omntec RA-1-NYS is an One Tank High Level Remote Annunciator with Strobe. The OMNTEC's RA-series remote annunciators are compatible with LU and LPD controllers.

Learn More

Omntec RA-2 is a Two Tank High Level Remote Annunciator. The OMNTEC's RA-series remote annunciators are compatible with LU and LPD controllers.

Learn More

Omntec RA-3 is an Three Tank High Level Remote Annunciator. The OMNTEC's RA-series remote annunciators are compatible with LU and LPD controllers.

Learn More

Omntec RA-4 is a Four Tank High Level Remote Annunciator. The OMNTEC's RA-series remote annunciators are compatible with LU and LPD controllers.

Learn More

Omntec RA-6 is a Six Tank High Level Remote Annunciator. The OMNTEC's RA-series remote annunciators are compatible with LU and LPD controllers.

Learn More

Omntec RAS-1 is an One Tank High Level Remote Annunciator with acnowledge switch for use with the OEL8000II and K-Kits. RAS Series Annunciators are audio/visual remote alarm systems that can be mounted outdoors and in remote locations to ensure faster response to alarms.

Learn More

Omntec RAS-2 is a Two Tank High Level Remote Annunciator with acknowledge switch for use with the OEL8000II and K-Kits . RAS Series Annunciators are audio/visual remote alarm systems that can be mounted outdoors and in remote locations to ensure faster response to alarms.

Learn More

Omntec RAS-3 is a Three Tank High Level Remote Annunciator with acnowledge switch for use with the OEL8000II and K-Kits . RAS Series Annunciators are audio/visual remote alarm systems that can be mounted outdoors and in remote locations to ensure faster response to alarms.

Learn More

Omntec RAS-4 is a Four Tank High Level Remote Annunciator with acknowledge switch for use with the OEL8000II and K-Kits . RAS Series Annunciators are audio/visual remote alarm systems that can be mounted outdoors and in remote locations to ensure faster response to alarms.

Learn More

Omntec RAS-5 is a Five Tank High Level Remote Annunciator with acknowledge switch for use with the OEL8000II and K-Kits . RAS Series Annunciators are audio/visual remote alarm systems that can be mounted outdoors and in remote locations to ensure faster response to alarms.

Learn More

Omntec RAS-1-NYS is similar to the RAS-1 except it has a large strobe light (60,000 candle power) and a louder horn (110 dB multi-frequency). For use with the OEL8000II and K-Kits.

Learn More

Omntec RLY-RA-2 is a Remote Relays, Relay(s) - SPDT dry contact(s), rated at 120VAC, 5 amps resistive. Relay(s) housed in a NEMA 4X enclosure. Interfaces with LU and LPD low voltage remote outputs.

Learn More

Omntec RLY-RA-3 is a Remote Relays, Relay(s) - SPDT dry contact(s), rated at 120VAC, 5 amps resistive. Relay(s) housed in a NEMA 4X enclosure. Interfaces with LU and LPD low voltage remote outputs.

Learn More

Omntec RLY-RA-4 is a Remote Relays, Relay(s) - SPDT dry contact(s), rated at 120VAC, 5 amps resistive. Relay(s) housed in a NEMA 4X enclosure. Interfaces with LU and LPD low voltage remote outputs.

Learn More

Omntec RLY-RA-6 is a Remote Relays, Relay(s) - SPDT dry contact(s), rated at 120VAC, 5 amps resistive. Relay(s) housed in a NEMA 4X enclosure. Interfaces with LU and LPD low voltage remote outputs.

Learn More

Omntec SL-34 is a 3/4" Swage Lock. To isolate MTG probe head from chemical vapors in tank.

Learn More

Omntec SSF-2 is a 1.83” Diameter Stainless Steel Float Kit. This kit is an accessory for MTG and Sensor.

Learn More

Omntec SSF-4 is a 3.85” Diameter Stainless Steel Float Kit. This kit is an accessory for MTG and Sensor.

Learn More

Omntec TEM-CS is a Thermostat for the OEL8000II NEMA 4X Enclosure.

Learn More

Omntec VC-1 is a vented 4” riser cap for use with brine filled interstice.

Learn More

Omntec SK-4 is a Connector Sealing Kit.

Learn More

The OMNTEC LU3-SP1 Three Channel Sensor Controller is capable of accepting one L-R-1 or one L-2 -s eries sensor for high / low operation and one non-distinguishing optic sensor.

Learn More

Omntec L-1-S is a 12" Liquid Level Detection Sensor with single-point liquid alarm.

Learn More

Omntec MTG-F-R1-84 84" shaft length probe used with the OEL8000III monitors product levels, water levels and temperature in both underground and aboveground tank applications.

Learn More

Omntec BX-LS-.895 Nondistinguishing Leak-Detection Sensor .895" Diameter is the ideal sensor for sumps, dispenser pans, containment areas and annular spaces of double-wall steel tanks.

Learn More

The LWF-10 nondistinguishing sensor was designed to fit into the annular space of dry double-wall fiberglass tanks with 10 feet diameter. With its slim, compact shape and flexible snake-like shaft, the LWF can easily be installed and removed from grade.

Learn More

The LWF-4 nondistinguishing sensor was designed to fit into the annular space of dry double-wall fiberglass tanks with 4 feet diameter. With its slim, compact shape and flexible snake-like shaft, the LWF can easily be installed and removed from grade.

Learn More

Omntec RLY-RA-1 is a Remote Relays, Relay(s) - SPDT dry contact(s), rated at 120VAC, 5 amps resistive. Relay(s) housed in a NEMA 4X enclosure. Interfaces with LU and LPD low voltage remote outputs.

Learn More

Omntec LF-1-SS-12 is a Single Point Float Sensor, Stainless Steel Stem, 12" standard length.

Learn More

The OMNTEC LU6-LF-2F4O six channel sensor controller is designed for monitoring high level and leak detection in a variety of applications. Capable of accepting up to six single point optic sensors.

Learn More